To alleviate at least some of these problems I have set up a source repository and a package repository.
You can clone the version of openwrt at the point of Vocore's addition with this:
- Code: Select all
git clone -b VoCoreOrig https://github.com/noblepepper/openwrt
If you build this you will get an image which is very close to what is in the vocore.v1.0.bin
file in Vonger's upload area along with a lot of packages that will work with it.
If you don't want to build the whole enchilada I set up an area with what you get after building:
After you flash this image
http://noblepepper.com/wp/wp-content/vocore-1.0/openwrt-ramips-rt305x-vocore-squashfs-sysupgrade.bin
(make sure you check the md5sum which should be 95eaa2bdf6a5adeb8f74db50c003e1fa) you can use packages from my package repository without issues about kernel version. Do this by changing /etc/opkg.conf on the vocore to:
- Code: Select all
#src/gz chaos_calmer http://downloads.openwrt.org/snapshots/trunk/ramips/packages/packages
src/gz chaos_calmer http://noblepepper.com/wp/wp-content/vocore-1.0/packages
dest root /
dest ram /tmp
lists_dir ext /var/opkg-lists
option overlay_root /overlay
If you want to switch back to the development trunk just uncomment the first line and comment the second line after you flash the latest image at https://downloads.openwrt.org/snapshots/trunk/ramips/openwrt-ramips-rt305x-vocore-squashfs-sysupgrade.bin.