Running usb storage
Posted: Wed Apr 27, 2016 8:48 pm
Hi there,
I got my VoCore with the Dock2.0 yesterday. Now I want to get the audio as well as a usb-stick working together.
For this I downloaded the "VoCore v1.0 Dock2.0 Firmware" from the download section of the wiki. I also managed to force install the modules needed for usb-storage, etc. from the openwrt feeds, which don't match the checksum (of course). A "hexdump -C /dev/sda | head" works fine, but I can't get the filesystem driver for ext4 (or vfat) up and running. When running "modprobe ext4", i get the following error from "dmesg"
ext4: Unknown symbol __blockdev_direct_IO (err 0)
My guess is that the kernel and the modules differ too much in configuration to work together. Are the matching modules available somewhere else for download? Or what is the best thing to do with a low risk of bricking that thing? Without audio I can get along, without usb-storage I can't.
Thanks in advance,
SvOlli
I got my VoCore with the Dock2.0 yesterday. Now I want to get the audio as well as a usb-stick working together.
For this I downloaded the "VoCore v1.0 Dock2.0 Firmware" from the download section of the wiki. I also managed to force install the modules needed for usb-storage, etc. from the openwrt feeds, which don't match the checksum (of course). A "hexdump -C /dev/sda | head" works fine, but I can't get the filesystem driver for ext4 (or vfat) up and running. When running "modprobe ext4", i get the following error from "dmesg"
ext4: Unknown symbol __blockdev_direct_IO (err 0)
My guess is that the kernel and the modules differ too much in configuration to work together. Are the matching modules available somewhere else for download? Or what is the best thing to do with a low risk of bricking that thing? Without audio I can get along, without usb-storage I can't.
Thanks in advance,
SvOlli