using bootloader
Posted: Wed Aug 31, 2016 12:29 pm
Hi,
I've accidently downloaded a corrupted image and now I want to load a default image.
I have a white VoCore v1.0 PCB
VoCore> loadb ; Sending file: vocore16.bin using kermit-C
## Ready for binary (kermit) download at 0x80100000 at 57600 bps...
VoCore> erase linux
....
VoCore> cp.linux 380004 ; size of vocore16.bin
VoCore> bootm
Booting image at 80100000
...
Verifying checksum ... OK
Uncompressing Kernel Image ... LZMA ERROR 1 - must reset board to recover
U-Boot ...
Version: 30 May 2014 20:52:36
Press 'x' ..
Booting image at bc050000 .Bad Magic Number, FFFFFFFF
Any idea of what I do wrong?
One told me not alle white Vocore v.1.0 has 16M memory is this correct?
I've accidently downloaded a corrupted image and now I want to load a default image.
I have a white VoCore v1.0 PCB
VoCore> loadb ; Sending file: vocore16.bin using kermit-C
## Ready for binary (kermit) download at 0x80100000 at 57600 bps...
VoCore> erase linux
....
VoCore> cp.linux 380004 ; size of vocore16.bin
VoCore> bootm
Booting image at 80100000
...
Verifying checksum ... OK
Uncompressing Kernel Image ... LZMA ERROR 1 - must reset board to recover
U-Boot ...
Version: 30 May 2014 20:52:36
Press 'x' ..
Booting image at bc050000 .Bad Magic Number, FFFFFFFF
Any idea of what I do wrong?
One told me not alle white Vocore v.1.0 has 16M memory is this correct?