How to connect over UART?
- warsh
- Posts: 1
- Joined: Sat Oct 18, 2014 5:39 am
How to connect over UART?
I'm on a Mac; how can I connect to VoCore over UART TTL?
- Peter H
- Posts: 58
- Joined: Wed Nov 12, 2014 10:24 pm
Re: How to connect over UART?
Do these help?
Connecting and flashing through UART & U-Boot with OSX
http://vonger.cn/?topic=connecting-and- ... t-with-osx
VoCore: Connect through UART/TTL:
http://vonger.cn/?p=780
Connecting and flashing through UART & U-Boot with OSX
http://vonger.cn/?topic=connecting-and- ... t-with-osx
VoCore: Connect through UART/TTL:
http://vonger.cn/?p=780
- leo1981
- Posts: 4
- Joined: Tue Nov 25, 2014 4:27 pm
Re: How to connect over UART?
I looked at the final VoCore V1.0 schematics and they are different from the blog post above.
Which ones are the correct pins?
http://vonger.cn/upload/VoCore.v1.0.pcb.pdf
TXD2 and RXD2 are the 2nd and 4th pin.
http://vonger.cn/vocore/VoCore.v1.0.sch.pdf
TXD2 and RXD2 are the 2nd and 5th pin.
I am not an expert in schematics and PCBs, but I am confused.
Which ones are the correct pins?
http://vonger.cn/upload/VoCore.v1.0.pcb.pdf
TXD2 and RXD2 are the 2nd and 4th pin.
http://vonger.cn/vocore/VoCore.v1.0.sch.pdf
TXD2 and RXD2 are the 2nd and 5th pin.
I am not an expert in schematics and PCBs, but I am confused.
- sistemasorp
- Posts: 7
- Joined: Fri Nov 28, 2014 10:06 am
Re: How to connect over UART?
The correct ones are in this manual:
http://vonger.cn/upload/vocore.manual.pdf
I have had to solder the pins to access to the uart console when I changed the wifi configuration.
http://vonger.cn/upload/vocore.manual.pdf
I have had to solder the pins to access to the uart console when I changed the wifi configuration.
- charliex
- Posts: 42
- Joined: Sun Nov 16, 2014 5:34 pm
- Location: los angeles
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 164 guests