How to connect over UART?
Posted: Sat Nov 15, 2014 12:40 am
by warsh
I'm on a Mac; how can I connect to VoCore over UART TTL?
Re: How to connect over UART?
Posted: Sun Nov 16, 2014 4:28 am
by Peter H
Do these help?
Connecting and flashing through UART & U-Boot with OSX
http://vonger.cn/?topic=connecting-and- ... t-with-osxVoCore: Connect through UART/TTL:
http://vonger.cn/?p=780
Re: How to connect over UART?
Posted: Tue Nov 25, 2014 4:42 pm
by leo1981
I looked at the final VoCore V1.0 schematics and they are different from the blog post above.
Which ones are the correct pins?
http://vonger.cn/upload/VoCore.v1.0.pcb.pdfTXD2 and RXD2 are the 2nd and 4th pin.
http://vonger.cn/vocore/VoCore.v1.0.sch.pdfTXD2 and RXD2 are the 2nd and 5th pin.
I am not an expert in schematics and PCBs, but I am confused.
Re: How to connect over UART?
Posted: Fri Nov 28, 2014 10:11 am
by sistemasorp
The correct ones are in this manual:
http://vonger.cn/upload/vocore.manual.pdfI have had to solder the pins to access to the uart console when I changed the wifi configuration.
- IMG_20141128_165551.jpg (162.88 KiB) Viewed 7807 times
Re: How to connect over UART?
Posted: Fri Nov 28, 2014 7:54 pm
by charliex