OK I have tried doing this over and over again, I even had to upload firmware through UART to start from scratch and still not having any luck.
I was able to do this on another Vocore but for some reason I cannot on this one.
Can someone look at my screen shots and tell me if I am doing something wrong?
I even tried changing the ip from 192.168.61.1 to 192.168.1.1 in lan config and had no luck.
My wireless network shows up in Luci but if I try to enable it it won't.
Also, I am not able to see Vocore through my wifi after doing this
Any help is greatly appreciated!!!
Help with AP+STA
- rcpaul
- Posts: 39
- Joined: Sun Nov 09, 2014 4:20 am
Help with AP+STA
Last edited by rcpaul on Tue Jun 16, 2015 10:54 pm, edited 1 time in total.
- Vonger
- Posts: 896
- Joined: Sun Oct 19, 2014 6:00 am
Re: Help with AP+STA
Do you setup the firewall?
You must allow it access firewall.
Please update /etc/config/firewall, add one line
config wifi-iface
option name wan
list network 'wan'
+ list network 'wwan'
list network 'wan6'
http://vocore.io/wiki/index/id:17
after that, it should work
You must allow it access firewall.
Please update /etc/config/firewall, add one line
config wifi-iface
option name wan
list network 'wan'
+ list network 'wwan'
list network 'wan6'
http://vocore.io/wiki/index/id:17
after that, it should work
- rcpaul
- Posts: 39
- Joined: Sun Nov 09, 2014 4:20 am
Re: Help with AP+STA
Yes thats the last screen shot shown. Not sure what i am doing wrong
- Vonger
- Posts: 896
- Joined: Sun Oct 19, 2014 6:00 am
Re: Help with AP+STA
Looks everything correct.
1. Check if AP mode(not AP+STA) works.
2. Check if STA mode works.
If both works, it must be config error.
Maybe special chars in your ssid?
1. Check if AP mode(not AP+STA) works.
2. Check if STA mode works.
If both works, it must be config error.
Maybe special chars in your ssid?
- rcpaul
- Posts: 39
- Joined: Sun Nov 09, 2014 4:20 am
Re: Help with AP+STA
Vonger,
Vocore does not show up in my wifi after doing this, shouldn't it show up???
Vocore does not show up in my wifi after doing this, shouldn't it show up???
- Vonger
- Posts: 896
- Joined: Sun Oct 19, 2014 6:00 am
Re: Help with AP+STA
your config is not same as mine, use vonger.cn/upload/vocore16.bin to recover the firmware and follow the step on wiki again.
- rcpaul
- Posts: 39
- Joined: Sun Nov 09, 2014 4:20 am
Re: Help with AP+STA
OK tried it again, flashed the firmware and redid steps for AP+STA on wiki and still no luck.
Every time I complete AP+STA steps in wiki, when I reboot I cannot connect to Vocore through wifi.
Every time I complete AP+STA steps in wiki, when I reboot I cannot connect to Vocore through wifi.
7 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 78 guests