Page 1 of 1

Uboot config

Posted: Tue Jun 02, 2015 1:27 am
by mcudev
Hi,

I would like to build the latest version of uboot to run on the vocore however I do not see the vocore as a target board. I did download the uboot zip provided on the wiki page however it looks like it is an older version of uboot. How did you get uboot running on the vocore, did you base the board config off an existing board?

Thanks,

mcudev

Re: Uboot config

Posted: Tue Jun 02, 2015 7:29 am
by Vonger
We are using MTK SDK uboot but not standard uboot. I hope to use official uboot but there is no port yet.
You can get uboot source in our wiki page.

Re: Uboot config

Posted: Tue Jun 02, 2015 11:33 pm
by noblepepper
The ralink SDK uses an ancient version of u-boot, this seems to be the norm on systems like this. When I started playing with u-boot I wanted to move to an up to date version but it was a lot of work.

You can get more info on u-boot through the links in this post