Page 1 of 1

Cumulative patch with mmc support

Posted: Mon Jun 08, 2015 3:39 pm
by scythe
Hi all,

I've created a cumulative patch with mmc support for OpenWRT from the following 3 components:

These are basically all the modifications needed to build an mmc compatible OpenWRT for the VoCore, instructions all from
Tested on Chaos Calmer Bleeding Edge, r45926, kernel 3.18.14.

root@OpenWrt:/# [ 1927.630000] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1927.640000] mmc0: new SD card on SPI
[ 1927.650000] mmcblk0: mmc0:0000 SA02G 1.83 GiB
[ 1927.720000] mmcblk0: p1 p2 p3
root@OpenWrt:/# mount
/dev/mmcblk0p2 on /mnt type ext3 (rw,relatime,data=ordered)

Download the patch from
Also, here is the compiled firmware (3 407 876 bytes).

If you want luci, fdisk or FAT support, you'll have to change the options in OpenWRT Buildroot and recompile, the above firmware is using the default options without these tools.