My board seemed to be working and then I tried editing the settings to make it join my wireless network. When that did not work I connected to it via the TTL input and saw that on boot up was near complete I would see a message that it was running out of memory and shutting down PID's Then it loops like this every few seconds. If I boot to safe mode it is OK. I ran first boot and it looks like the initial wireless, firewall, and network files are restored but still have problem. I put a bench power supply on to guarantee a stable voltage.
Any ideas ?
My VoCore is running out of memory
- ArkEngr
- Posts: 38
- Joined: Tue Oct 20, 2015 1:58 pm
- Vonger
- Posts: 897
- Joined: Sun Oct 19, 2014 6:00 am
Re: My VoCore is running out of memory
Hi, that might be UART2TTL conflict with VoCore boot strap. Just disconnect your VoCore with UART2TTL(RX, I remember) and boot, around 2~3 second, connect UART2TTL to VoCOre,will fix it.
- ArkEngr
- Posts: 38
- Joined: Tue Oct 20, 2015 1:58 pm
3 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 12 guests