Page 1 of 1

My VoCore is running out of memory

Posted: Tue Oct 20, 2015 2:43 pm
by ArkEngr
My board seemed to be working and then I tried editing the settings to make it join my wireless network. When that did not work I connected to it via the TTL input and saw that on boot up was near complete I would see a message that it was running out of memory and shutting down PID's Then it loops like this every few seconds. If I boot to safe mode it is OK. I ran first boot and it looks like the initial wireless, firewall, and network files are restored but still have problem. I put a bench power supply on to guarantee a stable voltage.

Any ideas ?

Re: My VoCore is running out of memory

Posted: Tue Oct 20, 2015 3:45 pm
by Vonger
Hi, that might be UART2TTL conflict with VoCore boot strap. Just disconnect your VoCore with UART2TTL(RX, I remember) and boot, around 2~3 second, connect UART2TTL to VoCOre,will fix it.

Re: My VoCore is running out of memory

Posted: Wed Oct 21, 2015 2:25 pm
by ArkEngr
That works. Thanks.