Page 1 of 1

Damaged H.264 stream

Posted: Thu Feb 14, 2019 2:37 pm
by jab
After some time of using VoCam camera, a green segments started to appear in the H.264 video stream. See attached image. In higher resolutions, this error is more visible. This happens only in H.264 stream, MJPG stream is not affected at all.

Re: Damaged H.264 stream

Posted: Fri Feb 15, 2019 11:02 am
by Vonger
if power off it wait one minute then connect, is it same result?

Re: Damaged H.264 stream

Posted: Fri Feb 15, 2019 12:08 pm
by jab
Yes, this "Matrix" noise appears every time since the problem started occur.

Re: Damaged H.264 stream

Posted: Sun Feb 17, 2019 1:02 am
by Vonger
I see, I will contact the chip FAE, maybe it is firmware issue.

Re: Damaged H.264 stream

Posted: Sun Apr 05, 2020 1:08 pm
by Vonger
It should be some key frame loss package. If mjpeg works, that means hardware should be normal, please try the source code in SDK to record some h264 video from the camera, check if the problem is still there.