VoCore2 JTAG connections

[jkeeble]

Does the VoCore2 support JTAG debug?

Can code lode onto the VoCore2 platform without using JTAG?

The MT7688 data sheet says that the following pins are used for JTAG
RxD1: Hi at reset
LED0: JTAG_TDO
LED1: JTAG_TDI
LED2: JTAG_TMS
LED3: JTAG_CLK
LED4: JTAG_RST_N

I suggest you number the pins on the VoCORE2 document so we all have a reference.

[Vonger]

OK, thank you for the advance. we will do it.
We have export the pins but we did not have 10K pull-up resistor.