VoCore Forum

Does the VoCore2 support JTAG debug?

Can code lode onto the VoCore2 platform without using JTAG?

The MT7688 data sheet says that the following pins are used for JTAG
RxD1: Hi at reset
LED0: JTAG_TDO
LED1: JTAG_TDI
LED2: JTAG_TMS
LED3: JTAG_CLK
LED4: JTAG_RST_N

I suggest you number the pins on the VoCORE2 document so we all have a reference.

OK, thank you for the advance. we will do it.
We have export the pins but we did not have 10K pull-up resistor.