Can't connect after deleting WAN6 interface

dimitry
 
Posts: 16
Joined: Thu Sep 07, 2017 7:57 pm

Can't connect after deleting WAN6 interface

Wed Sep 12, 2018 4:24 pm

I have VoCore2 running in AP mode.
I kept getting IPv6 address from it, which I don't use. So I went ahead and deleted the WAN6 interface.
Now I can no longer access VoCore2. I see the SSID and can associate with it, but don't get DHCP address (IPv4).
I assigned myself a static address on the same subnet (192.168.61.X), but still can't ping or ssh into VoCore2.

I am getting really frustrated with this thing.

dimitry
 
Posts: 16
Joined: Thu Sep 07, 2017 7:57 pm

Re: Can't connect after deleting WAN6 interface

Wed Sep 12, 2018 6:57 pm

I ended up reflashing the firmware and starting from scratch. What a waste of time.

This time I loaded new (not yet released) firmware. It doesn't have WAN6 interface.
Web GUI is really buggy. I ended up ditching it and doing everything via command line.

To disable DHCPv6 I edited the /etc/config/dhcp file and under "config dhcp 'lan'" section
removed "option dhcpv6" and "option ra". The unit no longer gives out IPv6 addresses.

Return to VoCore2/Lite/Ultimate

Who is online

Users browsing this forum: No registered users and 38 guests