Page 1 of 1

[2 Issues] Cannot scan for wifi; Vocore2 as WISP

Posted: Tue Apr 30, 2019 1:33 pm
by T-virus

I am backed the Vocore2 Ultimate.
Recently, I updated Vocore2 to the latest firmware and connect to Vocore´s wifi but cannot find anything. It keep scanning and does not show any result. I wonder if anyone can help me.

After fixing it, I would like to have Vocore2 function similar to TP-Link´s WISP mode. Meaning: Connect to a hotspot and broadcast another wifi for multiple devices; the hotspot only see 1 IP.
The problem is Unitymedia require a custom certificate
and also specific EAP, Authentication.
I found a guide here: ... ls-client/
But I have no idea how to apply to Vocore2.

I would be grateful if you can help me. I don´t have electronics/networks knowledge so more details guide would be nice.
In case Vocore cannot handle 2 wifi signal , connect to hotspot then relay to LAN is OK as well.
Thankyou and best regards,

Re: [2 Issues] Cannot scan for wifi; Vocore2 as WISP

Posted: Sun Jul 14, 2019 3:56 pm
by Vonger
Which firmware you are using?
Please use the latest firmware from but not openwrt.
openwrt one default wifi is off, so you can not find any ap anymore. one (in firmware section, normally uses a date code as its version) default enable wifi and optimize many options for easy using.