Page 1 of 1

USB Device

Posted: Thu Jul 11, 2019 5:16 pm
by john.lusher
What driver for Windows 10 will work with the VoCore to support USB 2.0?

Re: USB Device

Posted: Sat Jul 13, 2019 4:21 am
by Vonger
Do you mean the VoCore2 Ultimate driver?
You can download at vocore.io/v2, and "install cdc driver" http://vonger.cn/misc/vocore2/tools/usb2ttl.zip

Re: USB Device

Posted: Wed Jul 17, 2019 9:13 pm
by john.lusher
What I was interested in was using the port for higher speeds than a virtual COM port, i.e. truly being USB 2 and moving data back and forth over the endpoints.

Re: USB Device

Posted: Thu Jul 18, 2019 8:09 am
by Vonger
Try to use USB to ethernet, that can reach 100Mbps.
We also have a version with USB to ethernet, please contact support@vocore.io for that sample.
It will create a network adaptor on your computer and you can communicate with vocore2 by ethernet through usb port as a usb device.

Re: USB Device

Posted: Sun Aug 18, 2019 4:26 pm
by CuriousCat
Vonger wrote:Try to use USB to ethernet, that can reach 100Mbps.


This sounds neat, maybe you could do a blog post on how to enable it? I am compiling based on your github already so I think it would be an easy change?

Re: USB Device

Posted: Mon Aug 19, 2019 2:15 pm
by Vonger
CuriousCat wrote:
Vonger wrote:Try to use USB to ethernet, that can reach 100Mbps.


This sounds neat, maybe you could do a blog post on how to enable it? I am compiling based on your github already so I think it would be an easy change?


This is another version of vocore2, replace USB2TTL to USB2Ethernet.
If you want this version, just email support@vocore.io. It is not for open sell yet.