https://github.com/yuvadm/rockcast
I want to do the same as what this guy does, using Flashrom to dump the firmware from the stick's flash storage.
He used a Bus Pirate, but he wasn't clear about which bus/interface was he using (SPI? UART?).
Needless to say, I don't have one (Bus Pirate). However, I saw what another guy did at https://www.rototron.info/recover-bricked-bios-using-flashrom-on-a-raspberry-pi/, and he used a Raspberry Pi instead.
- Can I do the same (dumping my TV stick's firmware) using my VoCore2 Ultimate? (Let's just assume that I know which specific bus/interface to use, say SPI)
- If the answer is "yes", which programmer should I tell flashrom? Is it flashrom -p linux_spi like the Raspberry guy?