At least one problem with the 2.54 mm headers is the choice of pins or sockets. I prefer the sockets because they work with the male-male jumpers I use with Arduinos.
Any shop that deals in arduinos is a good source for 2.54 mm headers, Adafruit and nskelectronics are two I use as well as sparkfun.
VoCore Breakout Board
- noblepepper
- Posts: 240
- Joined: Sat Nov 29, 2014 3:22 pm
- Greenwire-Elektronik
- Posts: 101
- Joined: Thu Dec 04, 2014 6:31 am
Re: VoCore Breakout Board
Yeah, i might should post some links to webshops which have 2.54mm (0.100") pin headers in stock.
In other news:
I got plenty of pin headers in stock - also higher order quantities can be delivered fast!
In other news:
I got plenty of pin headers in stock - also higher order quantities can be delivered fast!
- Endat
- Posts: 44
- Joined: Mon Feb 02, 2015 6:29 pm
Re: VoCore Breakout Board
Greenwire-Elektronik wrote:How did you connect your VoCore now?
Sorry for late response.. I connect the same way as before, only with a new VoCore all of the GPIO work. On my other VoCore, I wore out some GPIO with IC hooks and that's why some didnt work.
Also when I soldered the pin headers onto the breakout board, I had the VoCore attached on the opposite side with sockets in place to keep perfect alignment.
- Greenwire-Elektronik
- Posts: 101
- Joined: Thu Dec 04, 2014 6:31 am
Re: VoCore Breakout Board
Meanwhile 77 boards were sent all over the world. This means that ~20 are left before i would have to invest again. So what have you done with them? Do you want to buy some more? Share your usage
- johnm
- Posts: 3
- Joined: Sun Jul 26, 2015 3:04 pm
Re: VoCore Breakout Board
sorry if this question was already answered - the 2.54mm pins, are they just the ones on the breakout board, or are they what are used to connect to vocore to the breakout?
I ask because I thought the vocore needed 1.27mm pins?
haven't received my vocore yet, so I'm still not 100% sure what to get...the data info says 1.27?
I ask because I thought the vocore needed 1.27mm pins?
haven't received my vocore yet, so I'm still not 100% sure what to get...the data info says 1.27?
- Vonger
- Posts: 896
- Joined: Sun Oct 19, 2014 6:00 am
Re: VoCore Breakout Board
Yes, VoCore need 1.27mm pins.
Use the breakout board can be covert to 2.54mm pins.
Use the breakout board can be covert to 2.54mm pins.
Who is online
Users browsing this forum: No registered users and 30 guests