USB-cable connector failure

cengelberts
 
Posts: 2
Joined: Thu Sep 08, 2016 6:47 pm

USB-cable connector failure

Thu Sep 08, 2016 6:59 pm

Hello,

the VoCam264 FHD cable connection between the two pcbs is broken. Its broken at the bottom side of the camera pcb. There must be a small black part to secure the connection between the cable and the cable connector. Somehow this part isn't there anymore.

What can I do to repair the usb-cable connection?

Image

wutong
 
Posts: 6
Joined: Tue Sep 22, 2015 11:00 am

Re: USB-cable connector failure

Sun Sep 18, 2016 11:49 am

I just tried some ways, and here is safest way:
1. heat connector off
2. pull metal off
3. put cover on
4. put metal on
Image

of course you can bend cover plastic, then pull it in. it might break cover plastic.

cengelberts
 
Posts: 2
Joined: Thu Sep 08, 2016 6:47 pm

Re: USB-cable connector failure

Mon Oct 10, 2016 9:22 am

Hello,

sorry for answering late.

I will try your approach, Thanks a lot.

Greetings,
Christoph

Vonger
 
Posts: 896
Joined: Sun Oct 19, 2014 6:00 am

Re: USB-cable connector failure

Sun Nov 13, 2016 2:42 pm

:) Emm, I should mention the connector only have 20 times life cycle and intend not to move once you get it.
I will update the content.

Return to VoCam264 & Screen

Who is online

Users browsing this forum: No registered users and 17 guests