I've spent a number of evenings reading around the OpenWRT forums (I couldn't find anything here), where people suggested enabling hairpinning on the wireless interface, disabling multicast_to_unicast, etc (for example see here: https://forum.openwrt.org/t/clients-in- ... er/2501/78), but nothing seems to make any difference.
This evening I did a hard reset but clients still can't see each other and I'm running out of ideas....
If I connect to the Vocore (SSH or serial), I can ping each wireless client from there, but they just can't communicate with each other :/
Any idea on what's going on?
My (latest) wireless config (last two options are additions to try and solve the issue):
- Code: Select all
config wifi-device 'ra0'
option type 'ralink'
option variant 'mt7628'
option country 'GB'
option hwmode '11g'
option htmode 'HT40'
option channel 'auto'
option disabled '0'
config wifi-iface 'ap'
option device 'ra0'
option mode 'ap'
option network 'lan'
option ifname 'ra0'
option encryption 'psk2'
option ssid 'some_ssid'
option key 'some_password'
option isolate 0
option multicast_to_unicast 0