Hey, I was seeing if I could use my vocore2 as a WiFi client, but I can't seem to get it to connect to an access point using either Luci UI or commandline.
Just wondering if there's any way to do this (or even documentation). It seems like a really useful feature not to support.
Thanks.
VoCore2 Ultimate WiFi client mode not possible?
- M0les
- Posts: 2
- Joined: Sun May 24, 2020 12:22 pm
- Vonger
- Posts: 897
- Joined: Sun Oct 19, 2014 6:00 am
Re: VoCore2 Ultimate WiFi client mode not possible?
It is able to connect as client. but must in AP+STA mode, it do not have pure STA(client) mode.
This is a driver limit.
I find new openwrt 19.07.2 mt76 driver is now much stable, if you do not need to run wifi at full speed(one antenna around 50Mbps) you can use this driver, as I test it can reach almost 40Mbps, enough for most situation, and I think that mt76 driver support pure STA mode.
This is a driver limit.
I find new openwrt 19.07.2 mt76 driver is now much stable, if you do not need to run wifi at full speed(one antenna around 50Mbps) you can use this driver, as I test it can reach almost 40Mbps, enough for most situation, and I think that mt76 driver support pure STA mode.
- M0les
- Posts: 2
- Joined: Sun May 24, 2020 12:22 pm
3 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 10 guests