Can't connect after deleting WAN6 interface

dimitry
 
Posts: 16
Joined: Thu Sep 07, 2017 7:57 pm

Can't connect after deleting WAN6 interface

Wed Sep 12, 2018 4:24 pm

I have VoCore2 running in AP mode.
I kept getting IPv6 address from it, which I don't use. So I went ahead and deleted the WAN6 interface.
Now I can no longer access VoCore2. I see the SSID and can associate with it, but don't get DHCP address (IPv4).
I assigned myself a static address on the same subnet (192.168.61.X), but still can't ping or ssh into VoCore2.

I am getting really frustrated with this thing.

dimitry
 
Posts: 16
Joined: Thu Sep 07, 2017 7:57 pm

Re: Can't connect after deleting WAN6 interface

Wed Sep 12, 2018 6:57 pm

I ended up reflashing the firmware and starting from scratch. What a waste of time.

This time I loaded new (not yet released) firmware. It doesn't have WAN6 interface.
Web GUI is really buggy. I ended up ditching it and doing everything via command line.

To disable DHCPv6 I edited the /etc/config/dhcp file and under "config dhcp 'lan'" section
removed "option dhcpv6" and "option ra". The unit no longer gives out IPv6 addresses.

Return to VoCore2

Who is online

Users browsing this forum: No registered users and 5 guests