/etc/config/network:
- Code: Select all
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config interface 'lan'
option type 'bridge'
option proto 'dhcp'
option ifname 'eth0'
ifconfig:
- Code: Select all
br-lan Link encap:Ethernet HWaddr B8:D8:12:66:4A:71
inet6 addr: fe80::bad8:12ff:fe66:4a71/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2776 errors:0 dropped:7 overruns:0 frame:0
TX packets:167 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:286839 (280.1 KiB) TX bytes:55466 (54.1 KiB)
eth0 Link encap:Ethernet HWaddr B8:D8:12:66:4A:71
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2956 errors:0 dropped:17 overruns:0 frame:0
TX packets:182 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:365557 (356.9 KiB) TX bytes:58690 (57.3 KiB)
Interrupt:5
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:672 errors:0 dropped:0 overruns:0 frame:0
TX packets:672 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:48464 (47.3 KiB) TX bytes:48464 (47.3 KiB)
When I disconnect and reconnect LAN cable dmesg shows:
- Code: Select all
[ 561.171266] rt3050-esw 10110000.esw: link changed 0x00
[ 563.389584] rt3050-esw 10110000.esw: link changed 0x01
Any idea, why the openwrt 21.02 vocore build does not have the LAN working? Did anyone test this?
If someone has a working .config file for building the openwrt 21.02 for vocore2, this will certainly help me.