Page 1 of 1

Building OpenWRT from scratch for VoCore2

Posted: Sat Nov 26, 2022 4:41 am
by iosdev
Hello,

I want to build OpenWRT for VoCore2 from scratch on Ubuntu.

Is there steps i can follow somewhere to do that?

I tried following the steps from https://github.com/Vonger/vocore2

But it didnt work for me, I got different errors depending on which set of steps I followed. One of the errors was that mt6828.ko was not found, something like that,

Can anyone help? Is there an official list of steps I can follow, I been trying to get it built for a week now and have failed.

Thanks

Re: Building OpenWRT from scratch for VoCore2

Posted: Sat Nov 26, 2022 5:57 am
by LuHui
can you provide build log?

Re: Building OpenWRT from scratch for VoCore2

Posted: Sun Nov 27, 2022 4:01 am
by iosdev
Hello,

I found the mt6828.ko driver and it builds without error now.

But when i load the build to the board it doesnt boot up anymore, the red light comes on but no SSID is broadcast, so i cant do anything anymore i cant connect to it to flash the factory firmware, so its bricked!

Anybody can help?

Thanks

Re: Building OpenWRT from scratch for VoCore2

Posted: Mon Nov 28, 2022 1:01 pm
by Vonger
mt7628.ko driver can not work with default openwrt, it will need the mediatek modified openwrt to support it.
to unbrick a vocore is not hard, check vocore.io/v2.html, you will need some cable. If you are using VoCore2 Ultimate, one usb cable is ok to recover from uboot by kermit.